| Contour: GB9749E |
Base: long plates (40mm wide by 235mm long with round end).
Function: Exterior sets “E” with cylinder hole
Passage sets “P” without cylinder hole
Non-handed to suit left or right-handed doors.
Spindle hole to key hole centre measures 85mm
Finish: SCP CP |
|
 |
| Linear: GB9713E |
Base: long plates (40mm wide by 235mm long with round end).
Function: Exterior sets “E” with cylinder hole
Passage sets “P” without cylinder hole
Non-handed to suit left or right-handed doors.
Spindle hole to key hole centre measures 85mm
Finish: SCP CP |
|
 |
| President: GB9750E |
Base: long plates (40mm wide by 235mm long with round end).
Function: Exterior sets “E” with cylinder hole
Passage sets “P” without cylinder hole
Non-handed to suit left or right-handed doors.
Spindle hole to key hole centre measures 85mm
Finish: SCP CP |
|
 |
| Convex: GB9747E |
Base: long plates (40mm wide by 235mm long with round end).
Function: Exterior sets “E” with cylinder hole
Passage sets “P” without cylinder hole
Non-handed to suit left or right-handed doors.
Spindle hole to key hole centre measures 85mm
Finish: SCP CP |
|
 |
| Senator: GB9765E |
Base: long plates (40mm wide by 235mm long with round end).
Function: Exterior sets “E” with cylinder hole
Passage sets “P” without cylinder hole
Non-handed to suit left or right-handed doors.
Spindle hole to key hole centre measures 85mm
Finish: SCP CP |
|
 |
| Horizon: GB9748E |
Base: long plates (40mm wide by 235mm long with round end).
Function: Exterior sets “E” with cylinder hole
Passage sets “P” without cylinder hole
Non-handed to suit left or right-handed doors.
Spindle hole to key hole centre measures 85mm
Finish: SCP CP |
|
 |
| |
